[gtranslate]

A Short Guide for the Beginner Laptop Battery Tester

In case you are trying to find out whether your laptop’s battery is still functional, you can create an easy analysis. The simplest way is to just power up the laptop then see if it’s charging or not. This is a common way, and many people know it. Do you know some other ways?

Following are some different tips on how to analyze your laptop computer battery. Basically, this article is intended to be a laptop battery tester guide, to find out whether it is still working properly or not.

We will go through some good tips that you can use in order to correctly test your battery and see whether it is still working as it should.

Use a Multi-Meter

If you want to use a multi-meter, you need to connect the battery to the multi-meter. Connect the battery’s positive to one end of the multimeter, and the negative to the other end.

And then research the multi-meter how much power is left in the battery. It’s pretty easy to do and you will see exactly if the battery still has some power in it.

Use Another Charger

If you can get a different battery charger to analyze your battery energy, it will show if the charger or the battery is faulty. If then the battery will gain more power, then the issues you have encountered are with the charger and not the battery itself. In this case, the charger will need to be replaced.

Use a Dedicated Laptop Battery Tester

Finally, you can use a dedicated testing device to see how much power is left inside your battery. It’s one of the easiest ways to find out if you have a faulty battery.

Some methods are rough, and some methods are simple. You can select one of them according to your own possibilities. Just remember to always recharge your battery if it gets discharged.

You basically need to have a well-working battery, because it’s the only one giving power to your laptop.  Without it, the PC will not function. You need some energy in order to run a laptop, we all know that. Also, battery energy must be always charged with power, or it will not work.

So, if you have trouble with your battery, make sure you test it correctly to find out what is the cause of the issues. Otherwise, you might end up doing more harm than good. Here are some instructions on how to test your battery in a correct way.

Instructions

Attach the cable to your laptop computer (if it is not already.) If you are unsure where on your laptop to plug it in, examine the design of the connector and match it up with the input on the back of your laptop computer.

Press your laptop’s power button. If your laptop turns on and starts loading, then your battery is functional. If not, then your battery is not operating, and you should troubleshoot further from there.

Check the battery’s power percentage when your laptop is turned on and loaded. You can find this in the system tray in the lower right-hand corner of the screen.

If the battery charger is connected in, it will show how much from 100% you still have in the battery and it should say that it’s charging. When you unplug the charger, it will only tell you how much battery energy is staying.

A few Tips to Remember

If your laptop computer will not power up at all even when you have connected in the cable, ensure that the cable is linked with a power outlet and that your cable is linked correctly on the back of your laptop computer.

If you have done this and it is still not operating, then follows this guide to ensure that the battery is still working correctly, under normal parameters.

Do not examine any interiors of your laptop computer unless it is completely turned off. You do not want to risk any electrocution or even damaging your laptop.

Useful Software

Laptop Battery Tester is a lite and useful piece of software that is able to scan your battery for appropriate voltage and show you the results in an easily readable graphical format.

You can export the graphs in Microsoft Excel or as a picture. This small software can even load older pictures of previous results in order for you to be able to compare the results of previous tests with the ones you are receiving now. This is a great way to detect possibly appearing problems with the battery.

It’s free and displays the percentage of power you still have in your battery and it can also save the graphs automatically. It’s quite a useful program to use, especially when you want to see how your battery evolves over time.